Membership Plans: Protect your home – and budget
Consider our all inclusive Membership plans to guarantee that the air conditioning system stays in optimal condition. These plans are made to offer scheduled maintenance services on a regular basis that are specific to your system’s requirements. Our membership plans have advantages including longer system life priority service service and lower costs repairs and replacements.
By signing up for a membership plan, you can be confident that the air conditioning unit will get the necessary care to run correctly and efficiently all year.
With our Membership Plan ,which provides extended coverage for repairs and beyond typical warranties ,you can safeguard your investment. Our membership plans which include parts and labor at discounts for unforeseen breakdowns are made to provide customers with a peace of mind.
You can pick the degree of coverage that best fits your needs and budget from a range of plans such as Platinum, Gold and Silver . Our aim is to ensure that HVAC system is always prepared to provide peak performance and assist you in avoiding expensive out pocket charges.
Complete HVAC System
Membership Plans
GLOBALSILVER
GLOBALGOLD
GLOBALPLATINUM
Annual Maintenance
Annual Maintenance
Yes
Annual Maintenance
Yes
Annual Maintenance
Yes
Filter Replacements
Filter Replacements
No
Filter Replacements
No
Filter Replacements
Yes
100% Parts & Labor Coverage*
100% Parts & Labor Coverage*
No
100% Parts & Labor Coverage*
No
100% Parts & Labor Coverage*
Yes
Percentage Discount
Percentage Discount
10%
Percentage Discount
10%
Percentage Discount
15%
Unlimited Service Calls
Unlimited Service Calls
Yes
Unlimited Service Calls
Yes
Unlimited Service Calls
Yes
Priority Scheduling
Priority Scheduling
Yes
Priority Scheduling
Yes
Priority Scheduling
Yes
Cancel Anytime
Cancel Anytime
Yes
Cancel Anytime
Yes
Cancel Anytime
Yes
Plan Cost
Plan Cost
Plan Cost
Plan Cost
$54.16 per monthNeed protection for just a single system? A furnace or air conditioner? We have options for that too! Call and speak with a customer service team member today to find out more (216)797-1230
For commercial maintenance plan pricing for condos and commercial buildings please visit our Commercial HVAC page.
What is Annual Maintenance? Our Most Comprehensive Tune-Up.
At Global, our Annual Maintenanace Tune-Ups typically last 60-90 minutes and include 30 separate procedures to clean and inspect your system. Sometimes we do find problems, but what we’re trying to do is prevent them, which is why our Tune-Up and Maintenance plans have become so popular with our customers. See what’s included in our annual maintenance checklist:
INCLUDED IN A MULTI-POINT COOLING CHECK
- Record outdoor temperature at time of service.
- Measure High and Low voltage and record readings.
- Measure and record compressor start and running amps.
- Measure and record condenser fan motor start and running amps
- Measure start and run capacitor MFD for compressor and condenser fan motor
- Inspect all High and Low voltage electrical connections
- Measure refrigerant pressures for proper super-heat and sub-cool
- Clean condensate drain, and or Clean and cycle condensate pump (if applicable)
- Inspect contactors, relays and control boards for proper operation.
- Wash outside condenser coil clean all debris from around unit
- Lubricate accessible motors and bearings if applicable
- Measure and record temperature drop across evaporator coil (inside)
- Check evaporator coil for level for proper drainage (inside)
- Check and record Blower Motor and Capacitor operation and voltage( inside)
- Inspect/Test all water safety overflow safety controls (inside)
- Check thermostat Calibration, level and operations. (inside)
- Inspect ductwork for proper installation and sealed (inside) if applicable
- Change filter included with service (inside) standard 1″ filter
INCLUDED IN A MULTI-POINT HEATING CHECK
- Record outdoor temperature at time of service.
- Measure High and Low voltage and record readings.
- Measure and record compressor start and running amps.
- Measure and record condenser fan motor start and running amps
- Measure start and run capacitor MFD for compressor and condenser fan motor
- Inspect all High and Low voltage electrical connections
- Measure refrigerant pressures for proper super-heat and sub-cool
- Clean condensate drain, and or Clean and cycle condensate pump (if applicable)
- Inspect contactors, relays and control boards for proper operation.
- Wash outside condenser coil clean all debris from around unit
- Lubricate accessible motors and bearings if applicable
- Measure and record temperature drop across evaporator coil (inside)
- Check evaporator coil for level for proper drainage (inside)
- Check and record Blower Motor and Capacitor operation and voltage( inside)
- Inspect/Test all water safety overflow safety controls (inside)
- Check thermostat Calibration, level and operations. (inside)
- Inspect ductwork for proper installation and sealed (inside) if applicable
- Change filter included with service (inside) standard 1″ filter
It Only Takes a Second To
Get Started
Call us at
(216)797-1230